ProductBoot Scrubbers, Washers & Cleaners
B65166(2P) Manual Boot Washer with Sole Brushes
Image indicative of the range. Configurations may differ.
1 / 4 product images
Manual boot washer with fixed sole-cleaning brushes and a hand-held water-fed brush at each station. Grade 304 stainless steel body, frame and handrails, with other materials used for functional components.
Typical lead time: ± 10-15 working days. Final timing will be confirmed in your quotation.
Configure & quote
Choose a configuration
Your configuration
R14,381.00 (excl. VAT)
Ex works · Delivery charges excluded
Indicative pricing · final price confirmed in your quote
Prices shown are indicative and based on the latest available information. They may change with prevailing material costs, order quantities, specifications, and other requirements. Final pricing is confirmed in a formal quotation.
Number of stations: Three
B65166(S3-112-2PL) is ready to quote.
Number of stations
Selected model
B65166(S3-112-2PL)
Model details
Overview
Each station has fixed brushes for cleaning boot soles and a hand-held water-fed scrubbing brush for the sides and uppers. The fixed brush arrangement is for sole cleaning only.
Water operation Water flow is controlled by a mixer lever that can be operated by hand or wrist. Wrist operation can reduce direct hand contact with the lever. The current design uses a mixer rather than a push-button valve.
Materials The main body, structural frame, handrails and wetted surfaces of the wash enclosure are Grade 304 stainless steel. The non-wetted rear cover panel is galvanised mild steel, the internal water pipework is copper, and proprietary valves and fittings may have a chrome-plated finish. Brushes and other functional components use materials appropriate to their function. The complete assembly is not manufactured entirely from Grade 304 stainless steel.
Waste connection The standard waste outlet is 1½-inch BSP with a BSPT tapered thread. Outlet position is specified by the selected station configuration.
Operating water pressure Connect to a normal reticulated water supply. A nominal supply pressure of approximately 300 kPa is recommended. Pressure at the mixer must not exceed 600 kPa; install a suitable pressure-reducing valve where the site pressure exceeds this limit.
Installation The unit is freestanding on adjustable feet for levelling. Where required, the adjustable footplates may be anchored to the floor to secure the unit.
Intended use and operating load Normal use allows one user per station to rest one foot on the unit during cleaning. The unit is designed to support the loads imposed under these normal operating conditions. Users must not stand or climb on the unit. No separately certified maximum user-load rating has been established. The product is warranted for its intended use under normal operating conditions.
Selected configuration: Three stations; left hand waste outlet.
Overall dimensions: 1610 mm (L) x 650 mm (W) x 1100 mm (H).
Specifications
Overall dimensions: 1610 mm (L) x 650 mm (W) x 1100 mm (H). B65166(2P); Three stations; left hand waste outlet. Each station has fixed brushes for cleaning boot soles and a hand-held water-fed scrubbing brush for the sides and uppers. The fixed brush arrangement is for sole cleaning only. Grade 304 stainless steel body, frame, handrails and wash enclosure; galvanised rear cover; copper internal pipework. Hand-/wrist-operated mixer. 1½-inch BSPT waste. Approximately 300 kPa recommended supply; maximum 600 kPa at mixer. Freestanding on adjustable feet; footplates may be anchored. One foot resting per user per station; no standing or climbing; no separately certified maximum user-load rating.
Share this model with a colleague or reopen its specifications later.
Shortlist this configuration, add project notes and compare your options.
Product overview
Each station has fixed brushes for cleaning boot soles and a hand-held water-fed scrubbing brush for the sides and uppers. The fixed brush arrangement is for sole cleaning only.
Water operation Water flow is controlled by a mixer lever that can be operated by hand or wrist. Wrist operation can reduce direct hand contact with the lever. The current design uses a mixer rather than a push-button valve.
Materials The main body, structural frame, handrails and wetted surfaces of the wash enclosure are Grade 304 stainless steel. The non-wetted rear cover panel is galvanised mild steel, the internal water pipework is copper, and proprietary valves and fittings may have a chrome-plated finish. Brushes and other functional components use materials appropriate to their function. The complete assembly is not manufactured entirely from Grade 304 stainless steel.
Waste connection The standard waste outlet is 1½-inch BSP with a BSPT tapered thread. Outlet position is specified by the selected station configuration.
Operating water pressure Connect to a normal reticulated water supply. A nominal supply pressure of approximately 300 kPa is recommended. Pressure at the mixer must not exceed 600 kPa; install a suitable pressure-reducing valve where the site pressure exceeds this limit.
Installation The unit is freestanding on adjustable feet for levelling. Where required, the adjustable footplates may be anchored to the floor to secure the unit.
Intended use and operating load Normal use allows one user per station to rest one foot on the unit during cleaning. The unit is designed to support the loads imposed under these normal operating conditions. Users must not stand or climb on the unit. No separately certified maximum user-load rating has been established. The product is warranted for its intended use under normal operating conditions.
Dimensions Overall dimensions (L x W x H): one station 610 x 650 x 1100 mm; two stations 1110 x 650 x 1100 mm; three stations 1610 x 650 x 1100 mm; four stations 2110 x 650 x 1100 mm.
Features & benefits
Hand- or wrist-operated mixer lever
Water flow is controlled by a mixer lever that can be operated by hand or wrist. Wrist operation reduces direct hand contact with the lever.
Key wash-area components in Grade 304 stainless steel
The main body, structural frame, handrails and wetted surfaces of the wash enclosure are Grade 304 stainless steel. The complete assembly also includes a galvanised mild-steel rear cover, copper internal pipework, and functional components made from other suitable materials.
1½-inch BSPT waste connection
The standard waste outlet is 1½-inch BSP with a BSPT tapered thread. Outlet position depends on the selected station configuration, helping match the unit to the intended drainage layout.
Installation-ready water-pressure guidance
Connect to a normal reticulated water supply. A nominal supply pressure of approximately 300 kPa is recommended, and pressure at the mixer must not exceed 600 kPa. Where site pressure exceeds this limit, install a suitable pressure-reducing valve.
Freestanding levelling feet with optional floor anchoring
The unit is freestanding on adjustable feet for levelling. Where required, the adjustable footplates may be anchored to the floor to secure the unit.
Fixed sole brushes and water-fed hand brush
Each station combines fixed brushes for cleaning boot soles with a hand-held water-fed scrubbing brush for the sides and uppers. The fixed brushes clean soles only.
One to four stations
Available with one, two, three or four stations: 610, 1110, 1610 or 2110 mm long respectively. All configurations are 650 mm wide and 1100 mm high.
Product data
Specifications & models
Specifications
- Number of stations
- Configurable
- One
- Two
- Three
- Four
- Waste Outlet Orientation
- By model
- Centre
- Left Hand
| Specification | Value | Configuration |
|---|---|---|
| Number of stations |
| Configurable |
| Waste Outlet Orientation |
| By model |
Available models & compare variants
Compare your preferred models
Select two to four models below. Your selection is kept when you search, filter or change pages.
| Price & actions | |||||
|---|---|---|---|---|---|
| B65166(S1-112-2PC) | B65166(2P) Manual Boot Washer. Overall Dimensions: 610 mm (L) x 650 mm (W) x 1100 mm (H). One Station; Centre Waste Outlet. Each Station Has Fixed Brushes for Cleaning Boot Soles and a Hand-Held Water-Fed Scrubbing Brush for the Sides and Uppers. The Fixed Brush Arrangement Is for Sole Cleaning Only. Water Flow Is Controlled by a Mixer Lever That Can Be Operated by Hand or Wrist. Wrist Operation Can Reduce Direct Hand Contact with the Lever. The Current Design Uses a Mixer Rather than a Push-Button Valve. The Main Body, Structural Frame, Handrails and Wetted Surfaces of the Wash Enclosure Are Grade 304 Stainless Steel. The Non-Wetted Rear Cover Panel Is Galvanised Mild Steel, the Internal Water Pipework Is Copper, and Proprietary Valves and Fittings May Have a Chrome-Plated Finish. Brushes and Other Functional Components Use Materials Appropriate to Their Function. The Complete Assembly Is Not Manufactured Entirely from Grade 304 Stainless Steel. The Standard Waste Outlet Is 1½-Inch BSP with a BSPT Tapered Thread. Outlet Position Is Specified by the Selected Station Configuration. Connect to a Normal Reticulated Water Supply. A Nominal Supply Pressure of Approximately 300 kPa Is Recommended. Pressure at the Mixer Must Not Exceed 600 kPa; Install a Suitable Pressure-Reducing Valve Where the Site Pressure Exceeds This Limit. The Unit Is Freestanding on Adjustable Feet for Levelling. Where Required, the Adjustable Footplates May Be Anchored to the Floor to Secure the Unit. Normal Use Allows One User per Station to Rest One Foot on the Unit During Cleaning. The Unit Is Designed to Support the Loads Imposed Under These Normal Operating Conditions. Users Must Not Stand or Climb on the Unit. No Separately Certified Maximum User-Load Rating Has Been Established. The Product Is Warranted for Its Intended Use Under Normal Operating Conditions. Boot Washer 2P One Station | One | Centre | View specifications
| |
| B65166(S2-112-2PL) | B65166(2P) Manual Boot Washer. Overall Dimensions: 1110 mm (L) x 650 mm (W) x 1100 mm (H). Two Stations; Left Hand Waste Outlet. Each Station Has Fixed Brushes for Cleaning Boot Soles and a Hand-Held Water-Fed Scrubbing Brush for the Sides and Uppers. The Fixed Brush Arrangement Is for Sole Cleaning Only. Water Flow Is Controlled by a Mixer Lever That Can Be Operated by Hand or Wrist. Wrist Operation Can Reduce Direct Hand Contact with the Lever. The Current Design Uses a Mixer Rather than a Push-Button Valve. The Main Body, Structural Frame, Handrails and Wetted Surfaces of the Wash Enclosure Are Grade 304 Stainless Steel. The Non-Wetted Rear Cover Panel Is Galvanised Mild Steel, the Internal Water Pipework Is Copper, and Proprietary Valves and Fittings May Have a Chrome-Plated Finish. Brushes and Other Functional Components Use Materials Appropriate to Their Function. The Complete Assembly Is Not Manufactured Entirely from Grade 304 Stainless Steel. The Standard Waste Outlet Is 1½-Inch BSP with a BSPT Tapered Thread. Outlet Position Is Specified by the Selected Station Configuration. Connect to a Normal Reticulated Water Supply. A Nominal Supply Pressure of Approximately 300 kPa Is Recommended. Pressure at the Mixer Must Not Exceed 600 kPa; Install a Suitable Pressure-Reducing Valve Where the Site Pressure Exceeds This Limit. The Unit Is Freestanding on Adjustable Feet for Levelling. Where Required, the Adjustable Footplates May Be Anchored to the Floor to Secure the Unit. Normal Use Allows One User per Station to Rest One Foot on the Unit During Cleaning. The Unit Is Designed to Support the Loads Imposed Under These Normal Operating Conditions. Users Must Not Stand or Climb on the Unit. No Separately Certified Maximum User-Load Rating Has Been Established. The Product Is Warranted for Its Intended Use Under Normal Operating Conditions. Boot Washer 2P Two Station | Two | Left Hand | View specifications
| |
| B65166(S3-112-2PL) | B65166(2P) Manual Boot Washer. Overall Dimensions: 1610 mm (L) x 650 mm (W) x 1100 mm (H). Three Stations; Left Hand Waste Outlet. Each Station Has Fixed Brushes for Cleaning Boot Soles and a Hand-Held Water-Fed Scrubbing Brush for the Sides and Uppers. The Fixed Brush Arrangement Is for Sole Cleaning Only. Water Flow Is Controlled by a Mixer Lever That Can Be Operated by Hand or Wrist. Wrist Operation Can Reduce Direct Hand Contact with the Lever. The Current Design Uses a Mixer Rather than a Push-Button Valve. The Main Body, Structural Frame, Handrails and Wetted Surfaces of the Wash Enclosure Are Grade 304 Stainless Steel. The Non-Wetted Rear Cover Panel Is Galvanised Mild Steel, the Internal Water Pipework Is Copper, and Proprietary Valves and Fittings May Have a Chrome-Plated Finish. Brushes and Other Functional Components Use Materials Appropriate to Their Function. The Complete Assembly Is Not Manufactured Entirely from Grade 304 Stainless Steel. The Standard Waste Outlet Is 1½-Inch BSP with a BSPT Tapered Thread. Outlet Position Is Specified by the Selected Station Configuration. Connect to a Normal Reticulated Water Supply. A Nominal Supply Pressure of Approximately 300 kPa Is Recommended. Pressure at the Mixer Must Not Exceed 600 kPa; Install a Suitable Pressure-Reducing Valve Where the Site Pressure Exceeds This Limit. The Unit Is Freestanding on Adjustable Feet for Levelling. Where Required, the Adjustable Footplates May Be Anchored to the Floor to Secure the Unit. Normal Use Allows One User per Station to Rest One Foot on the Unit During Cleaning. The Unit Is Designed to Support the Loads Imposed Under These Normal Operating Conditions. Users Must Not Stand or Climb on the Unit. No Separately Certified Maximum User-Load Rating Has Been Established. The Product Is Warranted for Its Intended Use Under Normal Operating Conditions. Boot Washer 2P Three Station | Three | Left Hand | View specifications
| |
| B65166(S4) | B65166(2P) Manual Boot Washer. Overall Dimensions: 2110 mm (L) x 650 mm (W) x 1100 mm (H). Four Stations; Left Hand Waste Outlet. Each Station Has Fixed Brushes for Cleaning Boot Soles and a Hand-Held Water-Fed Scrubbing Brush for the Sides and Uppers. The Fixed Brush Arrangement Is for Sole Cleaning Only. Water Flow Is Controlled by a Mixer Lever That Can Be Operated by Hand or Wrist. Wrist Operation Can Reduce Direct Hand Contact with the Lever. The Current Design Uses a Mixer Rather than a Push-Button Valve. The Main Body, Structural Frame, Handrails and Wetted Surfaces of the Wash Enclosure Are Grade 304 Stainless Steel. The Non-Wetted Rear Cover Panel Is Galvanised Mild Steel, the Internal Water Pipework Is Copper, and Proprietary Valves and Fittings May Have a Chrome-Plated Finish. Brushes and Other Functional Components Use Materials Appropriate to Their Function. The Complete Assembly Is Not Manufactured Entirely from Grade 304 Stainless Steel. The Standard Waste Outlet Is 1½-Inch BSP with a BSPT Tapered Thread. Outlet Position Is Specified by the Selected Station Configuration. Connect to a Normal Reticulated Water Supply. A Nominal Supply Pressure of Approximately 300 kPa Is Recommended. Pressure at the Mixer Must Not Exceed 600 kPa; Install a Suitable Pressure-Reducing Valve Where the Site Pressure Exceeds This Limit. The Unit Is Freestanding on Adjustable Feet for Levelling. Where Required, the Adjustable Footplates May Be Anchored to the Floor to Secure the Unit. Normal Use Allows One User per Station to Rest One Foot on the Unit During Cleaning. The Unit Is Designed to Support the Loads Imposed Under These Normal Operating Conditions. Users Must Not Stand or Climb on the Unit. No Separately Certified Maximum User-Load Rating Has Been Established. The Product Is Warranted for Its Intended Use Under Normal Operating Conditions. Boot Washer 2P Four Station | Four | Left Hand | View specifications
|
Specification support
Need a second set of eyes?
Installation & support
Technical information & documents
Product documents
Download installation, specification and warranty PDFs.
Product specification sheet
Dimensions, materials and product data.
PDF
Product warranty
12-month warranty and claims information.
PDF
Need a drawing, CAD file or compliance certificate?
Request technical filesCompatible spares
Showing spares for B65166(S3-112-2PL).
Brush Hand Assembly for B65166 Boot Washers
Fits: All models
Quantity: 1
Hose Assembly with Clamp and Hand Brush Adaptor
Fits: All models
Quantity: 1
Brush Sole Scrub SG 204mm Length
Fits: B65166(S3-112-2PL) — Boot Washer 2P Three Station
Quantity: 3
Product FAQ









