Sanitaryware

Walcro 144S 15mm built-in shower metering valve with sleeve and no-hold feature. Operating pressure 30–600kPa, for public showers and secure ablutions.

Walcro 103LC concealed back-entry toilet flushing valve with 20 mm BSP inlet, VR push button and sleeve. Includes the WC pan adaptor, push rod, concealed flush pipes and 90-degree bend.

Walcro 103LUR exposed, lever-operated urinal flushing valve for a single bowl, with a 20 mm connection, chrome finish, flow control, strainer and no-hold feature. The stated operating pressure range is 30–600 kPa. Recommended as an optional flushing valve for the Basterfield B17744(T) top-entry bowl urinal, used with one 04VFP-UR15TP 15 mm offset flush pipe per valve. Specify both components together for this installation; the valve, pipe and stainless steel bowl are each priced separately.

Walcro 104HB exposed toilet flushing valve with a 25 mm inlet, extended lever for mobility-impaired users and a back-entry flush-pipe arrangement. The lever can be positioned for left-hand or right-hand operation.

Walcro 104HT exposed toilet flushing valve with a 25 mm inlet, extended lever for mobility-impaired users and a top-entry flush-pipe arrangement. The lever can be positioned for left-hand or right-hand operation.

Walcro 106B exposed, lever-operated back-entry toilet flushing valve with a 25 mm BSP inlet, chrome-plated DZR brass body and back-entry flush pipe.

Exposed, lever-operated toilet flushing valve for top-entry WC pans, with a 25 mm BSP female inlet and chrome finish. An optional alternative to a separate flushing cistern.

Walcro 107CHP built-in boxed toilet flushing valve with a 20 mm inlet, XP push button, stainless steel cover plate and concealed flush pipes. Operating-pressure range: 100 kPa to 600 kPa.

Walcro 550URV Ø20mm Inlet Urinal Flush Valve

Grade 304 stainless steel drop-in wash hand basin for installation into a countertop in commercial and institutional wash areas.

9 L Grade 304 stainless steel low-level cistern with right-hand flush handle as standard. Includes PVC flush pipe, flush valve, ball valve and rubber bung for a compatible back-entry stainless steel WC pan.

Wall-mounted Grade 304 stainless steel cistern with 9-litre capacity for top-entry WC pans. Supplied with flushing system components, a straight PVC flush pipe and rubber bung. Side water inlet and right-hand flush handle as standard.

Wall-mounted Grade 304 stainless steel high-level cistern with pull rod-operated flushing, concealed fixings and an inspection panel.

Grade 304 stainless steel squat pan designed to be built into the floor, with an integral flushing rim and textured foot positions. The B17635(PB) P-trap model has a rear-entry tapered inlet suitable for bungs and a Ø102 mm waste outlet for Ø110 mm soil sewerage systems. Its top measures 595 × 635 mm, with overall height of 311 mm. For public, educational, correctional and industrial ablutions where a squatting toilet is specified.

Basterfield floor-mounted WC pans in 1.2 mm Grade 304 stainless steel for schools, public and institutional washrooms. B17642(P) has a horizontal P-trap outlet; B17642(S) has a vertical S-trap outlet. Both feature a brushed satin finish, integral flushing rim, back-entry flush inlet and a 102 mm outside-diameter outlet for 110 mm PVC soil pipe. Floor flanges have 6 mm fixing holes. Seat holes are provided; toilet seats and flushing systems must be specified separately.

Shrouded Grade 304 stainless steel toilet pan with external mounting flanges for correctional and other secure washroom installations.

Shrouded Grade 304 stainless steel back-to-wall toilet pan with internal mounting flanges for correctional and institutional washrooms.

Wall-mounted Grade 304 stainless steel toilet pan with a P-trap and back-entry flush inlet for commercial and institutional washrooms.

Wall-mounted stainless steel WC pan with P-trap and top-entry flush inlet for public, commercial and institutional washrooms. Toilet mounting holes are optional and omitted as standard. Excludes toilet seat and flush valve unless otherwise specified.

Shrouded Grade 304 stainless steel toilet pan with a P-trap, back-entry flush inlet and floor and wall mounting provisions.

Close-coupled shrouded Grade 304 stainless steel toilet with a top-entry flush arrangement, integral P-trap, stainless steel cistern and internal flushing mechanism.

Grade 304 stainless steel toilet pan for accessible washroom layouts, designed for floor and back-to-wall installation.

Shrouded wall-mounted Grade 304 stainless steel WC pan with P-trap and back-entry flush inlet for accessible washroom layouts. Toilet mounting holes are omitted as standard. Excludes toilet seat and flush valve unless otherwise specified.

Shrouded wall-mounted Grade 304 stainless steel WC pan with P-trap and top-entry flush inlet for accessible washroom layouts. Toilet mounting holes are omitted as standard. Standard toilet mounting holes are an optional selection. Excludes toilet seat and flush valve unless otherwise specified.

Shrouded wall-mounted Grade 304 stainless steel WC pan with S-trap and back-entry flush inlet for accessible washroom layouts. Toilet mounting holes are omitted as standard. Excludes toilet seat and flush valve unless otherwise specified.

Shrouded wall-mounted Grade 304 stainless steel WC pan with S-trap and top-entry flush inlet for accessible washroom layouts. Toilet mounting holes are omitted as standard. Excludes toilet seat and flush valve unless otherwise specified.

Grade 304 stainless steel toilet and wash hand basin combination for prisons and detention facilities, with a shrouded WC pan, rear mounting and a 150 mm splashback. Select pan position, paper holder and security wall sleeve.

Grade 304 stainless steel curved-back trough urinal for flush-valve operation, with a concealed sparge pipe and selectable length and waste outlet position. B17720 is the alternative with built-in mechanical auto-flush.

Built-in Grade 304 stainless steel flat back urinal with a covered concealed sparge pipe, radiused drainage trough and left- or right-hand waste outlet.

Grade 304 stainless steel curved-back urinal with mechanical auto-flush. A tipping tray fills through a drip cock, then periodically tips over to flush. No infrared sensor or electronic flush control.

Wall-hung Grade 304 stainless steel trough urinal for manual flush-valve installations. Choose one of nine lengths and a left- or right-hand 40 mm waste outlet. Optional 400 or 600 mm support brackets and the Walcro 550URV flush valve are priced separately.

Grade 304 stainless steel L-shaped trough urinal with an exposed sparge pipe and centre waste outlet for wall-mounted installations.

Grade 304 stainless steel automatic-flush trough urinal with a tipping tray, wall mounting and a choice of lengths and waste outlet positions.

Security bowl urinal with a back-entry water connection for installation in institutional and secure washrooms.

Wall-mounted Grade 304 stainless steel bowl urinal for public and commercial washrooms, with integral brackets, a polished inner bowl, satin exterior, brass flush coupling and 40 mm waste opening. Choose B17744(B) back entry for concealed pipework or B17744(T) top entry for an exposed connection. Flush controls are optional: specify B17744(155UW) for back entry, or one Walcro 103LUR valve with one UR15TP offset pipe for top entry. The bowl and flushing accessories are priced separately.

Concealed back-entry 15 mm urinal flush system recommended as an optional accessory for the Basterfield B17744(B) wall-mounted bowl urinal. The push-button arrangement keeps the flush connection behind the bowl for a concealed pipework installation. Specify one system per back-entry bowl and coordinate the wall and plumbing layout before installation. Supplied and priced separately from the stainless steel bowl; select the matching inlet arrangement when planning a new washroom or replacement.

Wall-mounted conical bowl urinal in 1.2mm Grade 304 stainless steel, with top entry, a fitted spreader and a pre-punched 1½″ waste outlet hole. The body shroud does not fully conceal the plumbing.

Shrouded conical urinal with a back-entry connection for institutional washrooms requiring an enclosed fixture design.

Wall-hung single-stall urinal for individual use in public, commercial and institutional washrooms.

Wall-hung urinette for individual washroom installations where a compact urinal fixture is required.

Square bowl urinal for public and institutional washrooms. Specify the required fixture and plumbing configuration for the installation.

Grade 304 stainless steel privacy panel for installation between wall-mounted urinals. Fully welded with a satin finish, radiused front edge and heavy-duty concealed bracket for a clean, vandal-resistant installation. Suitable for new installations and retrofitting; substrate-specific wall fixings are not included.

Grade 304 stainless steel wall-mounted shower seat with a fold-down slatted design. Choose 450mm, 600mm or 900mm length. Check dimensions and wall-mounting requirements, then select a size to request a quote.

Wall-mounted Grade 304 medical wash hand basin with a 150 mm splashback and pre-punched medical-mixer tap holes. Available with front support legs.

Heavy-duty wall-mounted drip sink with grid, manufactured from 1.2 mm Grade 304 stainless steel. Measures 480 mm (L) x 460 mm (W) x 180 mm (H) for utensil and equipment drainage in janitorial, healthcare, catering and laboratory utility areas.

Wall-mounted unit combining a drip sink and wash hand basin for healthcare and institutional wash-up areas.

Two-roll toilet roll holder with a one-piece Grade 304 stainless steel body, satin finish, manual dispensing, front sight opening and lockable lid.

Three-roll toilet roll holder with a one-piece Grade 304 stainless steel body, satin finish, manual dispensing, front sight opening and lockable lid.

Recessed security toilet roll holder for installation in secure and institutional washrooms.

Wall-mounted soap shelf for keeping soap within reach in commercial and institutional washrooms.

545mm wall-mounted single wash trough for construction sites, workshops and cleaning areas. Choose stainless steel grade, thickness, optional front support legs and an extended splashback.

1030mm wall-mounted double wash trough for construction sites, workshops and cleaning areas. Choose stainless steel grade, thickness, optional front support legs and an extended splashback.

Cleaner's wash trough for washing equipment and carrying out general cleaning tasks in commercial and institutional facilities.

Flat-bed wash trough for shared commercial and institutional washing areas. Specify the length and fittings required for the installation.

Shrouded, wall-mounted wash trough in Grade 304 stainless steel, 1.2mm thick, with knee-operated demand valves and deck-mounted high-neck basin spouts. Choose 1200mm with two stations, 1800mm with three, or 2400mm with four; a left- or right-hand waste outlet; and optional 40 × 40mm front support legs. Standard units have a 150mm deep basin, 50mm rear splashback, 225mm shroud and Ø40mm waste outlet.

Wall-mounted wash trough in 1.2 mm Grade 304 stainless steel with knee-operated demand valves, upstand-mounted bib spouts and a sloped basin. Choose 1200 mm with two stations, 1800 mm with three, or 2400 mm with four; left- or right-hand waste outlet; and optional Grade 304 front support legs. Supplied with heavy-duty wall brackets.

Shrouded, wall-mounted knee-operated wash trough in Grade 304 stainless steel with 1.2 mm construction, upstand and bib taps. Choose 1200 mm with two stations, 1800 mm with three, or 2400 mm with four; a left- or right-hand waste outlet; and optional front support legs. Front support legs are optional but recommended where units are mounted into ISO panels without additional support or for units 2400 mm in length.

Wall-mounted Grade 304 stainless steel handwash trough with a splash-reducing front face, sloped basin and left- or right-hand waste outlet. Choose a standard 100 mm or extended 400 mm splashback. Optional front support legs are recommended for 2400 mm units and ISO walling.

Wall-mounted Grade 304 stainless steel wash trough for shared handwashing in schools, workplaces and public ablutions. The brushed dull-polish finish supports routine cleaning, the sloped base directs water to the outlet, and the integral splashback helps protect the wall. Choose a length, left- or right-hand waste outlet, standard or extended splashback, and optional front support legs with adjustable feet. Includes heavy-duty wall brackets. Designed for wall-mounted bib taps, not pillar taps.

Wall-mounted wash trough in 0.91mm Grade 304 stainless steel, with a rear landing for deck-mounted tapware. Choose 1200, 1800 or 2400mm, a left- or right-hand waste outlet, standard or extended splashback, and optional front support legs. Tap holes are not punched as standard.

Wall-mounted Grade 304 stainless steel wash trough with a shroud and tap landing for pillar tapware, also suitable for a bib-tap installation. Choose 1200mm, 1800mm or 2400mm; left or right waste outlet; and optional front support legs. Tap quantity depends on the tap-hole arrangement. Tapware and pre-punched tap holes are excluded as standard. Optional Cobra sensor taps provide hands-free operation.

Stainless steel wash trough with a wide rear upstand designed to house sensor tap electronics. Suitable for sensor taps or standard bib taps, with pre-punched tap holes when tapware is specified or supplied. Choose 1200, 1800 or 2400 mm, left- or right-hand waste outlet, and optional support legs. Standard 0.9 mm Grade 304; thicker material and Grade 316 contact surfaces are available as advanced options. Tapware is priced separately.

The Basterfield B35250(112-1300C) laundry blanket wash trough is made from Grade 304 (18/10) stainless steel. It measures 1300mm long x 490mm wide x 890mm high, with a 300mm deep bowl and Ø40mm centre waste outlet. Supplied with two stainless steel gallows brackets for wall mounting and front support legs with adjustable feet. Designed and manufactured in South Africa.

Grade 304 stainless steel blanket wash trough on a welded tubular stand with adjustable feet and rear splashback. The 1100 mm model has a 400 mm deep bowl; tapware is optional.

Security wash trough for shared handwashing facilities in correctional and institutional environments.

Recessed Grade 304 stainless steel handwash basin and drinking fountain, supplied fitted with a Walcro 101R chrome-plated DZR brass self-closing metered bib tap.

Mobile knee-operated wash basin with an upstand and hands-free sanitiser dispenser for handwashing stations that need to be repositioned.

Small wall-mounted wash hand basin for commercial and institutional washrooms with limited available space.

Wall-mounted Grade 304 stainless steel security wash basin with enclosed plumbing, a removable access panel and integral rear splashback.

Stainless steel knee-operated wash hand basin with Easy Push front panel, gooseneck spout and enclosed plumbing for hands-free washing.

Wall-mounted, foot-operated Grade 304 stainless steel wash hand basin with pedestal included as standard. Choose a 50 mm standard integral splashback or a 400 mm extended splashback. Demand valve is standard; metered operation is available under advanced customisation.

Wall-mounted knee-operated wash hand basin in 1.2 mm Grade 304 stainless steel. Measures 600 x 435 x 692 mm overall, with a 150 mm bowl, central 40 mm waste outlet, rear upstand and bib spout. Demand activation is standard; metered activation is an advanced option.

600 mm Grade 316 stainless steel knee-operated wash basin with 1.2 mm construction, upstand, bib spout and demand valve.

Pedestal-mounted wash hand basin with a hand sanitiser dispenser for combined handwashing and sanitising stations.

Grade 304 stainless steel wall-mounted wash hand basin with gallows brackets and optional front support legs for commercial and institutional washrooms.

500 × 420 mm Grade 304 stainless steel wall-mounted wash hand basin with a choice of brackets, optional front legs and tiling-key configurations.

500 × 420 mm wall-mounted wash hand basin supplied with galvanised wall brackets.

Grade 304 stainless steel wall-mounted wash hand basin with extended splashback. Brackets, tapware, soap dispenser and front legs are optional extras.

Knee-activated Grade 304 stainless steel wash hand basin with an enclosed shroud and aerated gooseneck spout. Choose a standard or 400 mm extended splashback. Demand valve operation is standard; metered valve models are available under advanced options. Front support legs are an optional extra and are excluded from the base-model prices.

Make hands-free handwashing easy in busy workplaces. This knee-operated stainless steel basin is a practical choice for commercial kitchens, food preparation areas and staff wash stations.

Grade 304 wash hand basin for medical and general handwashing, with 25 mm radiused bowl corners, a 50 mm splashback and gallows brackets. Front support legs available.

Single-station Wudhu Khana ablutions bath for dedicated washing areas in prayer and ablution facilities.

Stainless steel security shower seat for correctional and institutional shower installations.

Heavy-duty Grade 304 stainless steel janitorial sink, 600 mm (L) x 700 mm (D) x 850 mm (H), with large cleaning bowl, hinged grid, hand wash basin and 40 mm waste outlets. Supported on legs with protective rubber bumpers.

Wall-mounted Grade 304 stainless steel cleaner's sink with hinged bucket grid, protective rubber bumpers and 40 mm waste outlet. Choose 480 or 600 mm length, with 500 mm width and 230 mm bowl depth as standard. A 300 mm bowl depth is available under advanced customisation.

Heavy-duty Grade 304 stainless steel shower trays for recessed or frame-mounted installation. Available in 750, 800 and 900 mm square sizes, each 100 mm high with a 40 mm apron and pre-punched 1 1/2-inch BSPT waste outlet hole.

Anti-vandal shower panel for public and institutional shower areas. Specify the controls and installation configuration required.

Straight general-purpose grab rail in Grade 304 stainless steel with a 32 mm diameter rail and mounting plates at both ends. Choose a 500 mm or 750 mm rail length for a wall-mounted handhold in washrooms, bathrooms and care facilities. Select the rail position and suitable wall fixings for the installation. The supplied image represents the range; the selected model determines the rail length.

Three-flange dog-leg grab rail manufactured from Grade 304 stainless steel. The Ø34 mm rail measures 300 × 300 × 300 mm and is supplied with mounting plates.

Fold-down hinged grab rail manufactured from Grade 304 stainless steel. The 850 mm wall-mounted rail includes a mounting plate and integrated toilet-roll holder.

Grade 304 stainless steel back grab rail for toilet installations using a cistern or flush valve. The 750 mm rail projects 216 mm from the wall. Wall fixings are not included and must be selected for the wall material.

Grade 304 stainless steel corner wash basin with integral wall fixings, a 40 mm waste outlet and tap holes to suit the installation.

Wall-mounted stainless steel wash trough for commercial and institutional washing areas.

Knee-activated Grade 304 stainless steel wash hand basin with a pedestal and integral six-knife electric steriliser, designed for continuous draw-off through a bottom ball-valve inlet and top trickle outflow.