Stainless steel single-bowl mortuary wash-up sink with tubular frame, 150 mm splashback and adjustable feet; specify the required Grade 304 or 316 configuration.

Recessed body tray for mortuary and forensic facilities, made from 1.2 mm Grade 304 stainless steel on a Ø25 mm tubular frame. Measures 2160 × 555 × 77 mm overall, including carry handles.

Standard flat body tray for mortuary and pathology facilities, made from 1.2 mm Grade 304 stainless steel on a Ø25 mm tubular frame. Measures 2160 × 555 × 77 mm overall, including carry handles.

Grade 304 stainless steel body tray with pressed drainage formation and two Ø20 mm drainage holes. Made from 1.2 mm sheet on a Ø25 mm tubular frame; 2080 × 555 × 76 mm overall, including handles.

Heavy-duty dressing and embalming trolley with an extended top for mortuary preparation areas.

Heavy-duty Grade 304 stainless steel mortuary trolley for body preparation areas. The 1.2mm model measures 2000mm (L) x 660mm (W) x 750mm (H). Four Ø100mm castors, two lockable, support repositioning and stationary use. A drainage fall directs liquid towards a pre-punched Ø40mm waste outlet.

Stainless steel mortuary table and sink for body preparation and wash-up areas, measuring 2567 mm (L) × 766 mm (W) × 900 mm (H). The nominal 1875 × 626 mm recessed slab and 500 × 500 × 250 mm sink bowl have separate Ø40 mm waste outlets. A stainless steel tubular frame, 65 mm apron and adjustable stainless steel feet support the unit. Choose Grade 304 or Grade 316 stainless steel in 1.2 mm or 1.5 mm thickness.

Non-lifting stationary pedestal-type autopsy table with a 2500 mm top and a right-hand basin for mortuary and examination areas.

Electrically elevating pedestal-type autopsy table with a 2500 mm top and right-hand basin for mortuary and examination areas.

Stainless steel post-mortem table measuring 1980 × 765 × 900 mm, with a 30 mm recessed slab, drainage fall and pre-punched Ø40 mm waste opening. Choose 1.2 mm or 1.5 mm thickness in Grade 304, or select Grade 316 under advanced configurations.

Grade 304 stainless steel washing table for the ritual washing of bodies in Ghusl facilities.

900mm model of the Grade 304 stainless steel wall-mounted writing table, with an inclined writing surface, front drawer and lockable compartment.

1500 mm Grade 316L stainless steel dissection table with backdraft ventilation for laboratory and examination areas.

1600 mm Grade 304 stainless steel dissection station with backdraft ventilation, a removable grid and a basin.

Floor-mounted stainless steel dissection table with downdraft grille, 300 mm ducting spigot and rinse system; choose length, grade and basin side.

Floor-mounted dissection docking station with backdraft and downdraft ventilation for use with compatible Basterfield docking trolleys.

Stainless steel laboratory staining table with dual downdraft ducts, water trough and perforated work trays. Available in Grade 304 or 316.

Grade 304 stainless steel mortuary vehicle trolley with a tubular frame for transferring bodies into compatible transport vehicles.

Adult autopsy headrest in 1.2mm Grade 304 stainless steel; 300mm (L) × 150mm (W) × 120mm (H), with a 106mm radius support. Includes a render and dimensioned drawings.

Child autopsy headrest in 1.2mm Grade 304 stainless steel; 220mm (L) × 80mm (W) × 60mm (H), with a 55mm radius support. Includes a render and dimensioned drawings.