General Manufacturing

Large 3-compartment PPE dispenser in Grade 304 stainless steel, measuring 750 mm long x 170 mm wide x 220 mm high. A hinged lid provides refill access, while keyhole slots allow wall mounting at changing rooms, work-area entrances and PPE issue points. Use 3 separate compartments to organise suitable disposable PPE such as hair nets, beard covers, masks or shoe covers. Select the contents to suit the available space and the workplace PPE procedure.

Shrouded wall-mounted stainless steel wash trough with knee-operated demand valves, low-level deck-mounted spouts and a sloped basin. Choose 1200 mm with two stations, 1800 mm with three, or 2400 mm with four; left- or right-hand waste outlet; and optional 40 x 40 mm front support legs. Legs are recommended for ISO-panel mounting without additional support and for 2400 mm units. The shroud conceals plumbing, the splashback limits splashing, and gallows brackets support the trough at the wall.

Wall-mounted wash trough in 1.2 mm Grade 304 stainless steel with knee-operated demand valves, upstand-mounted bib spouts and a sloped basin. Choose 1200 mm with two stations, 1800 mm with three, or 2400 mm with four; left- or right-hand waste outlet; and optional Grade 304 front support legs. Supplied with heavy-duty wall brackets.

Wall-mounted Grade 304 stainless steel handwash trough with a splash-reducing front face, sloped basin and left- or right-hand waste outlet. Choose a standard 100 mm or extended 400 mm splashback. Optional front support legs are recommended for 2400 mm units and ISO walling.

Wall-mounted Grade 304 stainless steel wash trough for shared handwashing in schools, workplaces and public ablutions. The brushed dull-polish finish supports routine cleaning, the sloped base directs water to the outlet, and the integral splashback helps protect the wall. Choose a length, left- or right-hand waste outlet, standard or extended splashback, and optional front support legs with adjustable feet. Includes heavy-duty wall brackets. Designed for wall-mounted bib taps, not pillar taps.

Wall-mounted wash trough in 0.91mm Grade 304 stainless steel, with a rear landing for deck-mounted tapware. Choose 1200, 1800 or 2400mm, a left- or right-hand waste outlet, standard or extended splashback, and optional front support legs. Tap holes are not punched as standard.

Stainless steel wash trough with a wide rear upstand designed to house sensor tap electronics. Suitable for sensor taps or standard bib taps, with pre-punched tap holes when tapware is specified or supplied. Choose 1200, 1800 or 2400 mm, left- or right-hand waste outlet, and optional support legs. Standard 0.9 mm Grade 304; thicker material and Grade 316 contact surfaces are available as advanced options. Tapware is priced separately.

Eco wall-mounted boot rack for organising work boots in changing rooms, locker rooms and footwear storage areas. Choose capacity for 4, 8, 12, 16, 20, 24, 30 or 36 boot pairs, with model-specific lengths and overall heights to suit the available wall space.

Wall-mounted Grade 304 stainless steel shoe rack with integral mounting brackets and safety-ended shoe-support tongues. Choose storage for 4, 8, 12, 16, 20, 24 or 36 shoe pairs. All models are 93 mm wide, with model-specific lengths and heights for changing rooms and footwear storage areas.

Wall mounted Grade 304 stainless steel boot rack with individual square tubular prongs and integral mounting brackets. Choose storage for 8, 12, 16, 20, 24 or 36 boot pairs, with a common 396 mm width and model-specific lengths and heights. The open rack organises wellington and work boots in changing rooms and footwear storage areas across food processing, agriculture, laundries and industry. Select the capacity and wall space for your site, and confirm suitable wall support and fixings.

Freestanding, single-sided Eco boot rack in Grade 304 stainless steel with solid round-bar boot supports. Choose storage for 8, 12, 16, 20, 24 or 36 boot pairs. All models are 500 mm wide, with lengths and heights matched to the selected capacity, for changing rooms and footwear storage areas.

Heavy-duty Grade 304 stainless steel janitorial sink, 600 mm (L) x 700 mm (D) x 850 mm (H), with large cleaning bowl, hinged grid, hand wash basin and 40 mm waste outlets. Supported on legs with protective rubber bumpers.

Wall-mounted Grade 304 stainless steel cleaner's sink with hinged bucket grid, protective rubber bumpers and 40 mm waste outlet. Choose 480 or 600 mm length, with 500 mm width and 230 mm bowl depth as standard. A 300 mm bowl depth is available under advanced customisation.

Compact walk-through dry boot scrubber for construction sites, mines and industrial workplaces. Its powder-coated mild-steel frame supports motorised brushes for cleaning boot soles and sides, with push-button activation, tool-free brush removal and adjustable feet. Overall size is 1560 × 790 × 1511 mm (L × W × H). Choose B65852(V1-220) for 220 V or B65852(V1-380) for 380 V. Designed for dry dirt removal; unsuitable for food-hygiene duties, wet washing or disinfection.

Heavy-duty Grade 304 stainless steel shower trays for recessed or frame-mounted installation. Available in 750, 800 and 900 mm square sizes, each 100 mm high with a 40 mm apron and pre-punched 1 1/2-inch BSPT waste outlet hole.