Hands-Free Handwashing

Chrome-plated DZR brass sensor pillar tap for touch-free handwashing with cold or pre-blended water.

Advanced AD-TM-22 Ø22mm thermostatic mixing valve for a pre-tempered hot-and-cold water supply. Optional for knee-operated basins: one per single station or one per two trough stations, rounded up.

Shrouded wall-mounted stainless steel wash trough with knee-operated demand valves, low-level deck-mounted spouts and a sloped basin. Choose 1200 mm with two stations, 1800 mm with three, or 2400 mm with four; left- or right-hand waste outlet; and optional 40 x 40 mm front support legs. Legs are recommended for ISO-panel mounting without additional support and for 2400 mm units. The shroud conceals plumbing, the splashback limits splashing, and gallows brackets support the trough at the wall.

Wall-mounted wash trough in 1.2 mm Grade 304 stainless steel with knee-operated demand valves, upstand-mounted bib spouts and a sloped basin. Choose 1200 mm with two stations, 1800 mm with three, or 2400 mm with four; left- or right-hand waste outlet; and optional Grade 304 front support legs. Supplied with heavy-duty wall brackets.

Shrouded, wall-mounted knee-operated wash trough in Grade 304 stainless steel with 1.2 mm construction, upstand and bib taps. Choose 1200 mm with two stations, 1800 mm with three, or 2400 mm with four; a left- or right-hand waste outlet; and optional front support legs. Front support legs are optional but recommended where units are mounted into ISO panels without additional support or for units 2400 mm in length.

Stainless steel wash trough with a wide rear upstand designed to house sensor tap electronics. Suitable for sensor taps or standard bib taps, with pre-punched tap holes when tapware is specified or supplied. Choose 1200, 1800 or 2400 mm, left- or right-hand waste outlet, and optional support legs. Standard 0.9 mm Grade 304; thicker material and Grade 316 contact surfaces are available as advanced options. Tapware is priced separately.

Mobile knee-operated wash basin with an upstand and hands-free sanitiser dispenser for handwashing stations that need to be repositioned.

Stainless steel knee-operated wash hand basin with Easy Push front panel, gooseneck spout and enclosed plumbing for hands-free washing.

Wall-mounted, foot-operated Grade 304 stainless steel wash hand basin with pedestal included as standard. Choose a 50 mm standard integral splashback or a 400 mm extended splashback. Demand valve is standard; metered operation is available under advanced customisation.

Wall-mounted knee-operated wash hand basin in 1.2 mm Grade 304 stainless steel. Measures 600 x 435 x 692 mm overall, with a 150 mm bowl, central 40 mm waste outlet, rear upstand and bib spout. Demand activation is standard; metered activation is an advanced option.

600 mm Grade 316 stainless steel knee-operated wash basin with 1.2 mm construction, upstand, bib spout and demand valve.

Pedestal-mounted wash hand basin with a hand sanitiser dispenser for combined handwashing and sanitising stations.

Knee-activated Grade 304 stainless steel wash hand basin with an enclosed shroud and aerated gooseneck spout. Choose a standard or 400 mm extended splashback. Demand valve operation is standard; metered valve models are available under advanced options. Front support legs are an optional extra and are excluded from the base-model prices.

Make hands-free handwashing easy in busy workplaces. This knee-operated stainless steel basin is a practical choice for commercial kitchens, food preparation areas and staff wash stations.

Knee-activated Grade 304 stainless steel wash hand basin with a pedestal and integral six-knife electric steriliser, designed for continuous draw-off through a bottom ball-valve inlet and top trickle outflow.